MULTICOOK MANUAL

CLEANING & MAINTENANCE

  1. Always unplug the cooker before cleaning.
  2. Wipe the outer body with a soft, dry or damp cloth. Do not immerse the main unit in water or run it under a tap.
  3. Wash the inner pot, lid, and accessories using warm water and a mild detergent. Use a soft sponge or brush to avoid scratching the non-stick surface.
  4. Dry all components thoroughly before reassembling.

✅ Do’s:

  • Fill between 20% and 80%, even when cleaning.
  • Keep the anti-block cover, pressure valve, and floatvalve clean.
  • Wait for the float valve to drop completely before opening the lid.
  • Use only silicone or wooden spatulas to protect the non-stick surface.
  • Keep the outside of the pot and the heating plate clean and dry.
  • Use the side handles to lift the unit, not the lid handle.
  • Contact Bergner customer care for replacements or
    repairs.

❌ Don’ts:

  • Don’t fill above the limit (over 80%) or below 20%.
  • Don’t damage or replace the seal ring with non-original parts.
  • Don’t put anything on the pressure valve or try to change it.
  • Don’t cover the lid or pot rim with cloth or foil.
  • Don’t touch the lid or steam valve during or right after cooking — they’ll be hot.
  • Don’t let children go near the unit while it's in use or still hot.
  • Don’t lift the unit using the lid handle.
    Don’t use the unit if the power cord is damaged —contact customer care.

✅ Do’s:

  • Fill between 20% and 80%, even when cleaning.
  • Keep the anti-block cover, pressure valve, and floatvalve clean.
  • Wait for the float valve to drop completely before opening the lid.
  • Use only silicone or wooden spatulas to protect the non-stick surface.
  • Keep the outside of the pot and the heating plate clean and dry.
  • Use the side handles to lift the unit, not the lid handle.
  • Contact Bergner customer care for replacements or
    repairs.

❌ Don’ts:

  • Don’t fill above the limit (over 80%) or below 20%.
  • Don’t damage or replace the seal ring with non-original parts.
  • Don’t put anything on the pressure valve or try to change it.
  • Don’t cover the lid or pot rim with cloth or foil.
  • Don’t touch the lid or steam valve during or right after cooking — they’ll be hot.
  • Don’t let children go near the unit while it's in use or still hot.
  • Don’t lift the unit using the lid handle.
    Don’t use the unit if the power cord is damaged —contact customer care.

SMART SETTINGS

Your MasterPro MultiCook gives you more than just presets.These three smart functions help you customise your cooking experience further:

1. Pressure Time
This is the actual cooking time under pressure, once
the cooker reaches full pressure.
You can adjust this using the “+” and “–” buttons
for most presets.
During this time, the lid remains locked and
cannot be opened.
Once the time is complete, the unit beeps and
switches to Keep Warm mode (bb).

2. Delay Timer
Start cooking at your convenience.
Press the Delay Time button.
Use the “+” and “–” buttons to set how many
hours/minutes later you want the cooking to begin.
You can delay the start from 30 minutes to 24 hours.
Example: Setting it to “2:00” means cooking will start
after 2 hours.
⚠️ Not available in: Keep Warm, Sauté,Yogurt, Cake, or
Manual modes.
✅ Use only for ingredients safe at room temperature
(e.g., rice, dal, grains).

3. Taste Choice (Texture Control)
Select how soft or firm you'd like your food to be perfect for
rice, dals, and curries.
Choose between:
Soft – Longer cooking for a softer texture
Standard – Default timing
Hard – Shorter cooking for a firmer bite
✳️ This option is only available on selected presets and will
be disabled for others automatically.

SMART SETTINGS

Your MasterPro MultiCook gives you more than just presets.These three smart functions help you customise your cooking experience further:

1. Pressure Time
This is the actual cooking time under pressure, once
the cooker reaches full pressure.
You can adjust this using the “+” and “–” buttons
for most presets.
During this time, the lid remains locked and
cannot be opened.
Once the time is complete, the unit beeps and
switches to Keep Warm mode (bb).

2. Delay Timer
Start cooking at your convenience.
Press the Delay Time button.
Use the “+” and “–” buttons to set how many
hours/minutes later you want the cooking to begin.
You can delay the start from 30 minutes to 24 hours.
Example: Setting it to “2:00” means cooking will start
after 2 hours.
⚠️ Not available in: Keep Warm, Sauté,Yogurt, Cake, or
Manual modes.
✅ Use only for ingredients safe at room temperature
(e.g., rice, dal, grains).

3. Taste Choice (Texture Control)
Select how soft or firm you'd like your food to be perfect for
rice, dals, and curries.
Choose between:
Soft – Longer cooking for a softer texture
Standard – Default timing
Hard – Shorter cooking for a firmer bite
✳️ This option is only available on selected presets and will
be disabled for others automatically.

SAFETY FEATURES & WARNINGS

✅ Built-in Safety

  • Lid Lock – Locks during pressure cooking and opens only after pressure drops.
  • Float Valve – Prevents lid opening while pressure is active.
  • Pressure Valve – Releases extra pressure automatically.
  • Anti-block Cover – Blocks food from clogging steam vents.
  • Thermal Fuse & Dry Heat Protection – Prevents overheating or dry cooking.

⚠️ Safety Tips

  • Never force open the lid under pressure. Wait for the float valve to drop.
  • Don’t cover the lid or pressure valve with cloth or foil.
  • Use only the side handles to lift the unit.
  • Keep children away during and after cooking.
  • If the unit shows unusual sounds, smells, or error codes, unplug and contact Bergner customer care.

Troubleshooting & Error Codes

If your MultiCook isn’t working as expected, try the steps below before contacting customer care.

COMMON ISSUES

CONTROL PANEL OVERVIEW